|
|
       |
|
|
PROMOTIONAL PRODUCTS SIGNAGE OTHER SUPPLIES
CONTACT INFO
Mailing Address: Integrity Equipment Sales & Service LLC 855 Hanover St #302 Manchester, NH 03104 Tel (603) 247-3231
Demonstration Center: 43 Birch Street, Unit 3D Derry, NH 03038
|
The high-speed, high-contrast & high-quality marking of ABS plastic is achieved using large mark area turnkey Trotec marking systems such as the FineMarker to laser engrave and mark this laser marked sample ABS plastic device.
Trotec lasers are ideally suited for the cutting of plastics, up to 1" thick as is the case with the acrylic "thumb".
Nearly every component of every aircraft needs identification and often times various methods of marking are required. Be it a Dahlgren mechanical engraver, or a direct laser mark produced by a flat-bed or galvanometer-steered laser from Trotec or a TherMark laser bonding process, Integrity Equipment has the resources to ensure a successful project.
The accuracy and power control of a Trotec flat-bed laser is second to none when it comes to the cutting of wooden and plastics architectural models. Awards
The accuracy and power control of a Trotec flat-bed laser is second to none when it comes to the engraving of awards. Black Oxide Steel Part Laser Engraved
The high-speed, high-contrast & high-quality marking of black oxide treated steel is achieved using large mark area turnkey Trotec marking systems such as the FineMarker FP-100 to laser engrave and mark this tool.
High quality marks can be achieved on brass using a flatbed or galvo-steered laser from Integrity Equipment Sales & Service in New England.
The high-speed, high-quality, high-contrast marking of carbide is achieved using Trotec laser marking systems - either galvo steered or flatbed design - such as the SpeedMarker or the FineMarker or FP 100 fiber laser, to laser engrave and mark carbide as shown in this 200x magnification image of laser engraved carbide. Ceramic Laser Marked for Industrial Applications
The high-speed, high-quality engraving and marking of industrial ceramics and such materials as industrial lava product, is achieved using Trotec laser marking systems - either galvo steered or large area flatbed configuration - such as the SpeedMarker or the FineMarker or FP 100 fiber laser, to laser engrave and mark ceramic or lava as shown in this 200x magnification image of a laser engraved material. Ceramic Tile Marking
The results achieved marking ceramic tile and similar materials, especially when using TherMark, CerMark or AtomicArtTM processes are second to none when using a Trotec laser.
The speed and accuracy a Trotec flat-bed laser is second to none when it comes to applications such as cutting cloth and various fabric materials.
The speed and accuracy a Trotec flat-bed laser is second to none when it comes to marking and cutting out cork products, such as this coaster.
The permanent and high contrast laser engraving or marking of copper is and excellent application for the large mark area Trotec laser marking system, such as the fiber laser FineMarker FP 100 used to laser engrave deep inside a copper fitting. Cutting Tools - Carbide & Tool Steel
The permanent and high-speed, high-contrast marking of carbide and tool steels can be accomplished using the Dahlgren and Trotec industrial laser systems as well as the TherMark process. Day/Night or Back/Edge-Lighted Products (Paint Removal)
The high-quality and precise removal of paint used in back and edge-lighted application is accomplished through the use of Trotec laser marking and engraving systems.
The deep engraving of metal & 2-d mold making is ideally suited for the Trotec FP-100, FineMarker or SpeedMarker FL.
The high-speed, high-contrast & high-quality marking of desk sets is achieved using Dahlgren and Trotec systems as well as the TherMark process.
The cutting of die boards is an application well suited for Trotec lasers such as the TP1313 Professional.
The permanent and high-speed, high-contrast direct part marking can be accomplished using the Dahlgren and Trotec industrial laser systems as well as the TherMark process. Firearms
The marking of the various components of firearms, from the federal firearms serial number to wooden stocks, is an ideal application for a galvanometer-steered or a flat bed CO2 and or fiber laser.
The marking of food products is accomplished quite often using a Trotec SpeedMarker CO2, galvanometer-steered high-speed laser marker while the product is rapidly moving past the laser on a conveyor. Gasket Cutting
The speed and accuracy a Trotec lasers yields themselves to the precise cutting of non-metallic gaskets for various industries such as automotive and pumping. Giftware & Promotional Products
The high-speed, high-contrast & high-quality marking of promotional products achieved using Dahlgren and Trotec systems as well as the TherMark process. Glass Marking
The engraving of glass, yielding a sand-blasted look, is a perfect application for a Trotec flat-bed laser or galvo-steered CO2 laser. Also the dark marking of glass can be achieved using the TherMark laser bonding solution. Glass-filled Polycarbonate
The speed and accuracy or a flatbed or a galvo-steered fiber or vanadate laser on such materials as glass-filled polycarbonate produces high quality images. Granite & Other Stone Engraving
The engraving of granite, CorianTM and other natural and synthetic stone materials is an ideally suited application for Trotec's broad range of flat-bed laser engravers. Stone surfaces as large as 51" square are easily processed. Industrial Fabric, Filters and Cloth
The speed and accuracy a Trotec laser is second to none when it comes to applications such as cutting industrial cloth and various fabric materials. Labels
The speed and accuracy a Trotec laser is second to none when it comes to marking various types of label stock, such as TESA, Bradey or 3M products.
The cutting and marking of leather products requires a CO2 laser system. Trotec is the world leader when it comes to high-performance; high-quality flat-bed laser systems that are ideally suited for meeting the needs of this industry. Marble Photograph Marking
From photograph to finished piece, Trotec flatbed lasers are the best in the industry for high-quality engraving on marble and other stone materials. Medical Instruments, Tools & Implants
Be it metal or plastic devices, the serial number traceability of dental, medical and surgical instruments, tools & implants is fast becoming the required standard. No matter the requirement--alphanumeric text, logos, 1, 2 or 3-d barcodes, the equipment and technology offered by Integrity Equipment is by far the best available.
The permanent and high-speed, high-contrast marking of any metal can be accomplished using the Dahlgren rotary engravers and Trotec lasers as well as the TherMark process. Model Planes, Trains & Automobiles
The cutting of 3-dimensional models such as the train car, or the marking of various items or the construction of the bird-house are all possible with a Trotec laser. Musical Instruments
The marking, engraving or cutting of wood to be used in the production of musical instruments such as guitars, violins and the like is an ideal application for Trotec CO2 flatbed systems.
The high-speed, high-contrast & high-quality marking of nameplate is accomplished using Dahlgren engravers and Trotec laser systems as well as the TherMark process. Nylon
The marking of nylon with laser is always a difficult, if not impossible task, but when using TherMark and a low cost CO2 laser, the marking or nylon with high-contrast images is easily achieved.
The accuracy and power control of a Trotec flat-bed laser is second to none when it comes to applications such as cutting paper for greeting cards and the like.
The high-speed, high-contrast & high-quality marking of polycarbonate is achieved using large mark area turnkey Trotec marking systems such as the FP 100 to laser engrave and mark this PEEK plastic material.
The accuracy and power control of a Trotec flat-bed laser is second to none when it comes to applications such as these.
The high-speed, high-contrast & high-quality marking of plastic is accomplished using Trotec laser equipment as well as the TherMark process.
The high-speed, high-contrast & high-quality marking of plaques is achieved using Dahlgren and Trotec systems as well as the TherMark process.
The high-speed, high-contrast & high-quality marking of polycarbonate is achieved using large mark area turnkey Trotec marking systems such as the FineMarker to laser engrave and mark this glass-filled polycarbonate.
The marking of printed circuit boards with 2-dimensional codes such as DataMatrix is a good application for Trotec Speedy and SpeedMarker lasers. 2-D Puzzle Making
Trotec CO2 lasers are a useful tool when it comes to cutting and engraving custom jigsaw puzzles from wood, plastic or other similar materials.
Trotec and Trodat are world-leaders in the rubber stamp industry. Trotec's lasers ranging from the Speedy 100 to the Laserati cover the full-spectrum of rubber stamp manufacturer / supplier needs.
Anti-counterfeiting and security codes such as Orbid ID and glyph codes can be permanently marked using Dahlgren and Trotec equipment.
Trotec and Dahlgren are world-leaders in the sign making industry.
Trotec and Dahlgren are world-leaders in the engraving items such as silverware.
Trotec's stent cutting systems are the best in the industry.
laser marked 17-4 stainless steel to withstand passivation and autoclave
laser marked 303 stainless steel to withstand passivation and autoclave
laser marked 304 stainless steel to withstand passivation and autoclave
laser marked 316L stainless steel to withstand passivation and autoclave
laser marked 316 stainless steel to withstand passivation and autoclave
laser marked 455 stainless steel to withstand passivation and autoclave The permanent and high-speed, high-contrast marking of most surgical instrument and implant metals -- stainless steels and titanium -- can can be accomplished using the turnkey large mark area (large engrave area) Trotec lasers or by incorporating the TherMark or CerMark laser material process.
The permanent and high-speed, even colorful marking or titanium is easily accomplished with either a flatbed or a galvo-steered laser from Integrity Equipment in New England. 3-D Puzzles
The cutting of 3-dimensional puzzles out of wood and plastic requires a CO2 laser system. Trotec is the world leader when it comes to high-performance; high-quality flat-bed laser systems that are ideally suited for meeting the needs of this industry.
The cutting and marking of wood products requires a CO2 laser system. Trotec is the world leader when it comes to high-performance; high-quality flat-bed laser systems that are ideally suited for meeting the needs of this industry. Be it cutting wood for model building, creating wood inlays, or marking decorative images on various wood items like rifle stocks or barrels.
Department of Defense (DoD) Instruction 5000.64 mandates that certain items are marked with an unique identifier:
Integrity Equipment Sales & Service is able to partner with you in the implementation of UID (Unique Identification) compliant marking technology. ____________________
Contact Integrity Equipment www.EngraveParts.com or www.CutWithLaser.com or www.LaserMarkParts.com n New England for the laser marking of stainless steel, aluminum, copper, brass, titanium or gold - any metal.
Contact Integrity Equipment www.EngraveParts.com or www.CutWithLaser.com or www.LaserMarkParts.com in New England for the laser engraving of stone, like marble, granite or slate or for the laser etching of glass,.
Contact Integrity Equipment www.EngraveParts.com or www.CutWithLaser.com or www.LaserMarkParts.com in New England for the laser engraving or laser cutting of wood.
Contact Integrity Equipment www.EngraveParts.com or www.CutWithLaser.com or www.LaserMarkParts.com in New England for cutting acrylic with lasers, acrylic used for signs or laser cut architectural models.
Contact Integrity Equipment www.EngraveParts.com or www.CutWithLaser.com or www.LaserMarkParts.com in New England for laser or mechanical rotary engravers for signage.
Contact Integrity Equipment www.EngraveParts.com or www.CutWithLaser.com or www.LaserMarkParts.com if you need a reliable laser marking job shop in New England.
Contact Integrity Equipment www.EngraveParts.com or www.CutWithLaser.com or www.LaserMarkParts.com in New England if you want to laser mark or laser cut plastics such as acrylic, ABS, polycarbonate, nylon, PEEK, PET, vinyl, polypropylene and many other plastics that can be laser engraved or laser cut.
Contact Integrity Equipment www.EngraveParts.com or www.CutWithLaser.com or www.LaserMarkParts.com in New England if you need an air filtration or exhaust unit for your existing laser marking system or an exhaust or vapor extraction unit for your new laser marking or cutting system, even if you do not buy the laser from us.
No matter what industry you are in, for lasers and rotary engraving equipment, contact Integrity Equipment www.EngraveParts.com or www.CutWithLaser.com or www.LaserMarkParts.com in New England .
Lasers for marking surgical instruments and implants. Lasers for cutting acrylic and plastic for the Sign Makers Industry. Lasers for marking UID codes on aerospace and military components. Lasers for the woodworking industry. Lasers for architects. Lasers for the A&E Awards and Engraving industry. Lasers for the promotional products industry. Lasers for the automotive industry. Lasers for the permanent engraving of firearms & knives. Lasers for photo engraving. Lasers for the monument industry. Lasers for bar code marking. Lasers for label marking. Lasers for ID tags. Lasers for general manufacturing. www.EngraveParts.com or www.CutWithLaser.com or www.LaserMarkParts.com
|
© 2008 Integrity Equipment Sales & Service LLC, Manchester NH